A £55 million (US$67.8 million) fund has been earmarked for five projects in the UK looking at developing the next generation of battery storage technology.

The government-led Faraday Institution has allocated the funding to five consortium-led projects with the aim of overcoming battery challenges, in particular by improving performance and cost characteristics. The projects will look at chemistries, systems and manufacturing methods of batteries used for grid storage, electric vehicles and other applications.

The projects are expected to run over a four-year period, split into four focus categories:

Next generation lithium-ion cathodes

Two projects will explore this focus. The first, dubbed FutureCat, is being led by the University of Sheffield. It is looking to deliver cathodes that hold more charge and are better suited to withstanding prolonged cycling, as well as promote ion mobility. This would increase the durability of the battery and the range and acceleration of an electric vehicle.

The second project, CATMAT, is to be led by the University of Bath, with the intention of discovering novel cathode materials, scaling up the synthesis of the most promising materials and assimilating them into fully integrated battery cells to demonstrate performance.

Lithium-sulfur technology

UCL is to lead this project, which aims to enable “rapid” improvements in lithium-sulfur technology, which it says could take batteries beyond the “inherent limitations” of lithium-ion, which is the current dominant chemistry in electric vehicle batteries.

Next generation sodium ion

Led by the University of St Andrews, this project aims to accelerate the development of sodium ion batteries and put a safe sodium ion battery with high performance, low cost and a long cycle life onto the path to commercialisation.

Energy storage installations for homes and businesses — involving battery technology — are on the rise in areas where extreme weather threatens the electric power grid, such as flood-prone Houston, wildfire-stricken California and hurricane-ravaged Puerto Rico.

Energy storage installations for homes and businesses — involving battery technology — are on the rise in areas where extreme weather threatens the electric power grid, such as flood-prone Houston, wildfire-stricken California and hurricane-ravaged Puerto Rico.

A sustained power outage can lead to serious consequences, such as loss of income and even death. Because of climate change, the frequency of these extreme weather events and outages will climb.

Traditionally, buildings would rely upon gas-powered diesel generators during outages. These generators have their own problems and do not necessarily help the electric grid become more resilient.

With recent technological changes, could batteries become the new generators?

Tracking sharp growth in the past year
Small-scale, so-called behind-the-meter energy storage accounted for 60% of battery capacity in the United States during the first quarter of this year.

Deployments grew 138% in the past year, driven in part by families and business leaders who are seeking resilience against power disruptions in our increasingly volatile climate.

When properly designed, electric energy storage can not only provide additional grid resilience, it can further minimize greenhouse gas and local air emissions compared with the conventional gas generators.

The EU’s latest Clean Energy Package (CEP) is “undoubtedly positive” for energy storage, with the technology expected to play a key role in meeting the legislation’s ambitious “32% by 2030” renewables target, Brittney Elzarei, senior policy officer at trade organisation EASE has said.

In an article for Volume 20 of PV Tech Power, the quarterly technical journal from our publisher Solar Media, Elzarei takes a close look at the CEP, noting that recognition by EU policymakers of the value of energy storage has greatly evolved in just the past decade since its third iteration in 2009.

“The CEP is undoubtedly positive for the storage sector. By establishing a binding renewables target of 32% by 2030 – along with targets for renewables in transport, heating and cooling – the package sets a high level of ambition that can only be achieved with the widespread deployment of flexibility solutions such as storage.”

Barriers still exist to the market, Elzarei argues, with so-called ‘double-charging’ – levying energy storage systems grid fees when both ‘consuming’ or ‘generating’ power from and to the grid – still in place and the lack of investment certainty that still exists when brokering contracts for services from energy storage, due to the limiting in duration of balancing services set out in the CEP.

Nonetheless, progress has been made, the EASE senior policy officer writes, taking a deep dive into the role of transmission network and distribution network operators, the scope for deploying non-battery energy storage technologies including hydrogen, and other topics. The article also takes a look further ahead to plans for full decarbonisation across the EU by 2050 and the Commission’s own analysis of the various different types and amounts of energy storage that will need to be deployed to meet 80% greenhouse gas (GHG) emissions reductions by that year.

Utility Ameren Missouri is planning three grid-scale solar facilities with energy storage, marking what is claimed will be the first ever instance of an energy company in the US Mid-West state powering its customers’ homes with batteries.

A release from the utility, a subsidiary of Ameren Corporation, said that it filed plans today with the Missouri Public Service Commission (MoPSC) for the building of three power plants, for which Ameren Missouri said it will invest around US$68 million.

The plants will be built in Green City, Richwoods and Uticah, dotted around the mostly-rural state, with each plant of 10MW solar PV capacity and an unspecified output and capacity of battery energy storage. Via Twitter, the company released a short publicity film which said the plan to build the solar capacity with batteries is an “innovative, cost-effective solution to help maintain reliable energy service in rural communities.”

“If an outage is detected, solar energy stored in batteries will help keep your lights on,” the video said.

The company just launched its first ever community solar facility mid-way through August, allowing customers to sign up to buy solar energy generated in 100kWh blocks at Ameren Missouri Lambert Community Solar Center. Meanwhile, it has also launched a Smart Energy Plan.

In addition to beefing up energy security with upgrades on transmission networks to cope with severe weather, the plan includes a reduction of carbon dioxide emissions by 80% from 2005 levels by 2050, with interim targets for 2030 (35%) and 2040 (50%).

The California Energy Commission (CEC) Oct. 30 will release two energy storage solicitations totaling $31 million to support the state’s goal under SB 100 of attaining 100% fossil-free electricity by 2045.

The commission wants to get the word out now because preparing energy storage projects and proposals can be time consuming, said Mike Gravely, CEC research program manager.

“We are doing this to bring new technologies that are cheaper and better performing to meet SB 100,” he said, adding that existing technology isn’t capable of meeting the requirements of the legislation.

Among the new technologies the commission focuses on are microgrids — and energy storage plays an important role in them, he said.

“Microgrids help integrate these clean technologies. These are the solutions we need to reverse the impacts of climate change.” Gravely noted that the focus on energy storage will help move microgrids along. All the microgrids that have received commission funding include energy storage.

Details on energy storage solicitations
Proposals for the energy storage projects will be due by the end of the year, and the commission will issue the awards between April and June, he said.

The first of the two energy storage solicitations is for $20 million and seeks technology demonstration projects in four categories.

“This is for projects that are maybe on the second generation of design,” said Gravely.